HC-05 python connection

       

import bluetooth

print "Searching for devices..."
print ""
nearby_devices = bluetooth.discover_devices()
num = 0
print "Select your device by entering its coresponding number..."
for i in nearby_devices:
 num+=1
 print num , ": " , bluetooth.lookup_name( i )

selection = input("> ") - 1
print "You have selected", bluetooth.lookup_name(nearby_devices[selection])
bd_addr = nearby_devices[selection]
port = 1
sock = bluetooth.BluetoothSocket( bluetooth.RFCOMM )
sock.connect((bd_addr, port))
print "Everything is OK, Start to write"
while 1:
 data = raw_input()
 if len(data) == 0: break
 sock.send(data)
sock.close()

Bluetooth 4.0 Arduino At-09

       


include 
SoftwareSerial mySerial(2, 3); // RX, TX
int PIN_EN_OUT = 4;
int PIN_STATE_IN = 5;


void setup() {
  // put your setup code here, to run once:
  mySerial.begin(9600);
  Serial.begin(9600);
  Serial.println("start at 09 bt");

  sendCommand("AT");
  sendCommand("AT+ROLE0");
  sendCommand("AT+UUID0xFFE0");
  sendCommand("AT+CHAR0xFFE1");
  sendCommand("AT+NAMESeloBT");
  sendCommand("AT+PIN123456");
}

void sendCommand(const char * command){
  Serial.print("Command send :");
  Serial.println(command);
  mySerial.println(command);
  //wait some time
  delay(100);
  
  char reply[100];
  int i = 0;
  while (mySerial.available()) {
    reply[i] = mySerial.read();
    i += 1;
  }
  //end the string
  reply[i] = '\0';
  Serial.print(reply);
  Serial.println("Reply end");
}

void readSerial(){
  char reply[50];
  int i = 0;
  while (mySerial.available()) {
    reply[i] = mySerial.read();
    i += 1;
  }
  //end the string
  reply[i] = '\0';
  if(strlen(reply) > 0){
    Serial.println(reply);
    Serial.println("We have just read some data");
  }
}

void loop() {
  readSerial();
  delay(500);
}

Solenoid valve for Urine bag